Tracking heatmap
In the widget, you see a heatmap that shows where a tracker has moved in the building. Dark red areas mean that the tracker was there often, while yellow areas show that the tracker spent less time there. You can also adjust the time period to see the movement for a specific time frame.
Operation
To use the Tracking Heatmap Widget efficiently, follow the steps below to configure the view and select the desired time period.
[A]
More Options
Opens a menu with additional settings.
[B1]
Zoom In
Enlarges the view of the current floor to see details better.
[B2]
Zoom Out
Reduces the view of the current floor to get an overview of a larger area.
[C]
Open Calendar
Opens a calendar to select the time period that is displayed in the heatmap. The calendar has a blue dot 
if a different time period is set than the standard time period.
[D1]
Time From
Determines the start time from which the heatmap data should be displayed.
[D2]
Time To
Determines the end time until which the heatmap data should be displayed.
[E]
Apply
Saves the changed times and updates the heatmap accordingly.
[F]
Cancel
Cancels the changes and keeps the previous settings.
[G]
Reset to Default
Resets the time information to the default values preset in the -> Widget Configuration.
When to use this widget
This widget should be used to visualize movements in a building or a specific floor over a defined period. It is particularly useful for analyzing heatmap data and understanding how people or objects move within a building.
Configure widget
Ensure that you are in the Dashboard menu.
Click «Add widget».
Select «Tracking heatmap».
Optional: In [H], select a primary asset that is used for the title and the alarms.
In [I], set how much space the widget should occupy on the dashboard (1 cell, 2 cells, or full width).
In [J], select the floor that is to be displayed in the widget.
In [K], select the default period for displaying the heatmap data:
From time: From when the movements are to be displayed.
To time: Until when the movements are to be displayed.
◈ The period shows the tracker movements between these two times.
In [L], select the trackers whose movements are to be visualized in the heatmap.
Click on [M] «Add widget».
▷ The widget is displayed on the dashboard.
Click on [N] to exit the configuration without saving changes.
Last updated