Asset Management
Content of the chapter: Editing and management of assets in the project.
Last updated
Content of the chapter: Editing and management of assets in the project.
Last updated
The asset management section gives you an overview of all the assets (e.g. sensors, devices, integrated systems, etc.). It enables you to view and edit asset details in order to store maintenance information or documents, for instance.
Each asset and each system has its own expert system and therefore also its own associated documentation. You can use Eliona to attach chosen data to assets and to file these in a version system. Here, the data can be synchronized via a Sharepoint, giving access to the most varied of areas within the business (with or without Eliona login).
Eliona asset management makes document management accessible throughout the business. This means that each employee can find the documents they need quickly and with ease. The standardized editing and storing means that the company has sovereignty over the data, a reliable single point of information, and can save time by cutting out the laborious hunt for specific versions.
External service personnel can also have direct access to the documents of a system online and be presented with all the information collated into one overview.
In asset management, you are given an overview of all the assets in your project. You can view and edit the asset details.
Example: a fault has occurred on your system. In asset management, you can find all the assets of your system. You click on the relevant assets and can see all the data, which is crucial when searching for the fault. You can also find troubleshooting information in the documents stored for the corresponding asset. Furthermore, you can locate the fault from the comfort of your desk, find the necessary data and then start rectifying the fault without having inspected the system in person.
Geographic / Functional Sorting: In the Asset Overview, assets can be sorted either by their geographic location or by their function. For example, a heating system is geographically located in the basement of the building. Functionally, the solar panels, which is located on the roof, and the outdoor temperature sensor on the first floor, also belong to the heating system. Select whether you want to display the geographic or functional sort.
GAI/BIM/Storey: For Asset, the following information can be read through these icons.
Collapse Structure: Collapses all assets.
Properties: The most important properties of the asset are listed here.
Status: Displays the status of the asset (active/inactive/not monitored).
Keyword: Quick search by keyword.
GAI: Filter by the GAI entered. Each asset has a unique GAI.
Asset Status: Selected statuses are displayed.
Reset Filters: Resets all filter settings and all assets are displayed.
Apply Filter: All previously set filters are applied.
Status: Displays the status of the asset (Active/Inactive/Non-Monitored).
Signal Strength: Shows the signal strength when the asset is paired to a device.
Go to: Leads to other features in Eliona that need this asset.
Attribute values
GAI: The asset GAI stands for Global Asset Identification. This is unique in the project.
Name: The asset name can be freely selected.
Description: Any description for the asset can be inserted here.
Asset Type: Cannot be changed here. Can only be changed in Asset Management Overview.
Project Name
Associated ID: Additional optional ID can be inserted here.
Parent Location: reference to another asset. e.g. a building, floor or room asset.
Parent Asset: Functional reference to another, parent asset.
Time to inactivity: Time until asset is marked as inactive.
Tags: Tags can be added to the asset. Tags can be used to add further classifications.
Field: Additional information such as owner or year can be added here.
Save: Save changes.
Expand file versions: Click the arrow to view the child files. These are suitable for versioned logs, for example.
Add file version: Upload a subordinate file.
Add file: Upload a file.
The links can be set up to open in the same tab or in a new tab.
Add link: When creating the link, a distinction is made between "Open URL in a new tab" and "Open URL in the same tab".
The Data window displays the values of the asset's attributes and all child assets in a list.
Asset List with Data: A list with the selected asset and all subordinate assets with all attributes are listed here.
Status: Shows the status of the asset (active/inactive/not monitored).
Input: Data is sent from the device to Eliona.
Output: data is sent from Eliona to the device.
Attribute values: list of attribute values.
Geographical / Functional Sorting: In the Asset Overview, assets can be sorted either by their geographical location or by their function. For example, a heating system is geographically located in the basement of the building. Functionally, the solar system, which is located on the roof, and the outdoor temperature sensor on the first floor, also belong to the heating system. Select whether you want to display the geographical or functional sorting.
Signal Strength: Shows the signal strength when the asset is paired to a device.
Go to: Leads to other features in Eliona that need this asset.
Status: Shows the status of the asset (Active/Inactive/Not monitored).
Signal Strength: Shows the signal strength when the asset is paired to a device.
Go to: Leads to other features in Eliona that need this asset.
Status: Displays the status of the asset (Active/Inactive/Unmonitored).
Create Ticket: Creates a ticket for the top-level asset.
Create Ticket: Creates a ticket for the corresponding asset.
Status: Displays the status of the asset (Active/Inactive/Unmonitored).
Create Rule: Creates a rule for the top-level asset.
Create Rule: Creates a rule for the corresponding asset.
Status: Displays the status of the asset (Active/Inactive/Unmonitored).
Create Digital Twin: Creates a Digital Twin for the top-level asset.
Create Digital Twin: Creates a Digital Twin for the corresponding asset.
Assets can be removed, but not deleted. The removed assets are kept in the archive and from there they can be restored.
Select Asset: Select one or more assets and click
Tags: Assigned tags.
Asset Type: Asset type of the asset.
Date: Date and time when the asset was deleted.
Active Assets: Click to hide active assets.
Inactive Assets: Click to hide inactive assets.
Unmonitored Assets: Click to hide unmonitored assets.
Asset Archive: The archive contains the removed assets. Assets cannot be deleted, only removed. However, they can be restored from the archive at any time. .
Search: Click to search for assets by keywords or asset type. .
Create Asset: Click the button to create a new asset.
Select All Assets: Click to select all assets.
Sort Assets: Click to sort assets alphabetically.
Move Asset: Click and drag the asset to subordinate it to another asset.
Select Asset: Click to select an asset and all subordinate assets.
: Click on the icon to read the GAI, description and.
: This icon shows if a is associated with the asset.
: This icon shows if a is associated with the asset.
: Assigned .
: Number of assigned to this asset. Click to open the list of .
: Number of triggered by this asset. Click on the alarm icon to open the list of .
of the asset.
Configure Asset: Click to change the name and asset type. Click on the asset name to configure the asset.
Additional Actions: Click to perform further actions.
Asset Type: Filter by selected .
Tags: Assets with these are displayed.
Click on any asset to get to the detail view. There you will find all current data of and description of the asset. You can also access the , , , and of the corresponding asset.
Menu: Choose between General Information, , , , and in the menu.
Information: General information from an asset. .
Attachments: Attached files. .
Links: Custom links from Eliona or other websites. .
Augmented Reality: If Augmented Reality is enabled, the AR code can be downloaded via . Configuration of the AR feature can be found at .
Position: Click to set/change the location of the asset on the .
Remove File: Click to remove the file.
Links in the asset details can be useful, for example, to go directly to the corresponding views in the without having to leave the open menu. The order of the links can also be changed by pressing and moving the link. The icon means that the link will open in a separate and in the same tab. To edit the link, click on .
Open link: Links with are opened in the same tab. Links with are opened in a new tab.
Edit link: Click to edit links.
Remove Link: Click to remove links.
Move link: Click and drag the link to another position.
Hide Inputs: Click to hide all attributes with the type Input.
Attribute Type: Displays the (Input/Output/Status/Information).
Hide Outputs: Click to hide all attributes with the type Output.
Hide status: Click to hide all attributes with the type Status.
Hide information: Click to hide all attributes with the type Information.
Search: Click to search for assets using keywords or .
Alarm List: A list with the selected asset and all subordinate assets with all are listed here.
Asset List with Tickets: A list with the selected asset and all subordinate assets with all are listed here.
Asset list with rules: A list with the selected asset and all subordinate assets with all are listed here.
Asset List with Digital Twin: A list with the selected asset and all subordinate assets with all are listed here.
Deleted By: Username from the that deleted the asset.
Search: Click to search for assets using keywords or. .
Restore Assets Individually: Click to restore the corresponding asset.
