Legacy

Chapter Overview: Using and Configuring the Legacy Feature

Legacy overview

Legacy overview

1. Edge Nodes: Shows the number of edge nodes.

2. Agents: Shows the number of agents.

3. Search: Click to search for edge nodes.
4. All Agents: Click to open a list of all existing agents.
5. Create Edge Node: Click to create a new Edge Node.
6. Pause Edge Node: Click to enable/pause the Edge Node.
7. Names: Shows names of the Edge Notes.

8. Number of Agents: Shows the number of agents from the Edge Node.

9. Remove Edge Node: Click to remove the Edge Node.
10. Configure Edge Node: Click > to configure the Edge Node.

Configure Edge Node

Configure Edge Node

1. Pause Edge Node: Click to activate/pause the Edge Node.
2. Remove Edge Node: Click to remove the Edge Node.
3. Names: Shows names of the Edge Node.

4. Identification Code: Enter the identification code.

5. Asset: Select a hardware asset.

6. Vendor: Enter the vendor.

7. Model: Enter the model.

8. Save: Save changes to the Edge Node.

9. Create Agent: Click to create a new agent.
10. Pause Agent: Click to activate/pause the agent.
11. Agent Name: Enter the agent name.

12. Type: Displays agent type.

13. Remove Agent: Click to remove the agent.
14. Configure Agent: Click > to configure the agent.

Create Agent

Choose Agent Type

Choose an Agent Type between MQTT/OPCUA/BACnet/IOSYS/URL/Webhook/Kafka/SBUS/MBUS/TTN/TRK.

Choose Agent Type

Name & Port

Enter a name and port and create the agent.

Create new Agent

Configure Agent

Configure Agent

1. Settings: Click to see an overview of the agent configuration.
2. Import: Click to import existing Access entries.
3. Add Access: Click to create an unconnected Access entry.
4. Name: Name of the agent.

5. Client ID: Client ID of the agent.

6. Server Address: Enter the discovery server address.

7. MQTT Broker Address: Enter the MQTT server address.

8. Version: Select a version.

9. TLS: Enable/disable TLS.

10. User name: Enter a user name.

11. Password: Enter a password.

12. Proxy URL: Enter the SOCKS5 proxy URL (optional).

13. Keep Alive: Select a value.

14. Network Operation Center Address: Enter the address.

15. Network Operation Center Token: Enter the token.

16. Subscription Address: Enter the address.

17. Unconnected Access entries: List of unconnected access entries.

18. Status: Status of the individual disconnected access entries.

19. Asset: Select an asset.

20. Device ID: Enter the device ID.

21. Device EUI: Enter the Extended Unique Identifier of the device.

22. Act Type: Enter the Act Type.

23. App EUI: Enter the Extended Unique Identifier of the application.

24. App Key: Enter the App Key.

25. App Skey: Enter the App Security Key.

26. Dev Address: Enter the dev address.

27. NWK Skey: Enter the NWK security key.

28. Description: A short description of the Access entry.

29. Connect Access Entries: Click the check mark to connect the Access entry.

30. Remove Access Entries: Click to remove the Access entry.
31. Connected Access entries: List of connected Access entries.

Agent list

Agent list

1. Active Agents: Hide the active agents.

2. Agents turned on: Hide the agents that are turned on.

3. Deactivated agents: Hide the deactivated agents.

4. Filter: Filter the list by agent type.

5. Unlinked Assets: List all the unlinked assets in the project.

6. Search: Click to search for a specific agent.
7. Status: Displays the status of the agent (Active/Inactive). The status can be changed using .
8. Name: Name of the agent.

9. Agent Type: Displays the agent type (MQTT/OPCUA/BACnet/IOSYS/URL/Webhook/Kafka/SBUS/MBUS/TTN/TRK).

10. Edge Node: Edge Nodes which are associated with this agent.

11. Devices: Number of devices.

12. Access Entries: Number of Access entries.

13. Unconnected Devices: Number of unconnected Access entries.

14. Remove Agent: Click to remove the agent.
15. Configure Agent: Click > to configure the agent.